Polypropylene Air Pump
Specifications
|
Plastic Pump Series
|
PP20 (1/2 Inch)
|
|
Max. Air Supply Pressure
|
6.8 bar
|
|
Inlet / Outlet
|
1/2" NPT
|
|
Air Inlet
|
1/4" NPT
|
|
Min. Pressure for Starting Air Valve
|
1.2 bar
|
|
Max Flow Rate
|
13.82 G.P.M. (52 LPM)
|
|
Max Speed
|
400 cpm
|
|
Flow of each cycle
|
0.15 L
|
|
Max. Air Consumption
|
350 NL/Min
|
|
Max. Size Solid
|
3/32" (2.4 mm )
|
|
Suction Lift Capability
|
6.4m Primed ; 3.7m Dry
|
|
Weight of Pump
|
4 Kg
|
|
Dimensions L x W x H (cm)
|
27 x 24 x 34
|
Air Pump Features Include:
- There are no sliding or rotating parts, our air pumps have very good efficiency even with when pumping high adhesive liquids with low flow rate.
- The pressure or the outlet of our air pumps can be regulated when the machine is running, there is no need to buy any high cost speed changeable motor or drive device.
- No damage to our air pumps if running with no input for a long time.
- The input pressure will never exceed the output pressure. No need to buy any pressure release device or by-pass.
- The outlet of our air pumps can be shut down at any time if necessary. Pump will stop immediately and won't cause any power waste, heat production or any abrasion damage. If you want to start the pump again, just open the outlet of the pump and it will start automatically.
- The efficiency of our pumps will never be reduced by any abrasion.
- Manual, remote or automatic control can be used to regulate the pumping output.
- In normal conditions, our air pumps are suitable for explosion environments without the need for any explosion proof motor or controller. Our Air Pumps are explosion proof.
- The flow rate regulation is controlled by air valve so no need for reflux device.
- Our air pump diaphrgms are of highest quality.
- Our air pumps are small and light, so very mobile.
Call our Australian Head Office Ph: 02 9607 4100 or email us:
sales@tonson-motor.com.au for any enquiries or questions on all Air Pumps.